LiNi0.5Mn1.5O4-based composite electrodes with improved properties prepared by a slurry spray deposition process.Yu.R.Journal of Power Sources.
Improving the electrochemical performance of Ni-rich cathode material LiNi0.815Co0.15Al0.035O2by removing the lithium residues and forming Li3PO4coating layer. Tang.Z-F.Journal of Alloys and Compounds.
Electrospun Li3.9Cr0.3Ti4.8O12nanofibers as anode material for high-rate and low-temperature lithium-ion batteries. Zou, H.L.Journal of Alloys and Compounds.
Long life anode material sodium titanate synthesized by a moderate method.Wang.H-Y.Materials Letters.
High rate capability of 5 V LiNi0.5Mn1.5O4cathode material synthesized via a microwave assist method.Feng.X-Y.Journal of Alloys and Compounds.
LiMPO4 and derived NaMPO4 (M = Mn, Fe, Mg) with excellent electrochemical properties for lithium/sodium ion batteries.Zou.B-K. Journal of Power Sources.
Surface Surgery of the Nickel-Rich Cathode Material LiNi0.815Co0.15Al0.035O2: Toward a Complete and Ordered Surface Layered Structure and Better Electrochemical Properties.Tang.Z-F. ACS Applied Materials and Interfaces.
The role of potassium ions in iron hexacyanoferrate as a cathode material for hybrid ion batteries. Liao.J.-Y. Electrochimica Acta.
Improving the electrochemical performance of LiNi0.5Co0.2Mn0.3O2 by double-layer coating with Li2TiO3 for lithium-ion batteries.Y. X-Q. Ionics.
The Influence of Electrode Microstructure on the Performance of Free-Standing Cathode for Aprotic Lithium-Oxygen Battery .Shen.C. JOM.
Protected Sulfur Cathode with Mixed Conductive Coating Layer for Lithium Sulfur Battery. Jin.J.JOM.
Ternary Porous Sulfur/Dual-Carbon Architectures for Lithium/Sulfur Batteries Obtained Continuously and on a Large Scale via an Industry-Oriented Spray-Pyrolysis/Sublimation Method.Liang X.ACS Applied Materials and Interfaces.
Cobalt-substituted Na0.44Mn1-xCoxO2: phase evolution and a high capacity positive electrode for sodium-ion batteries.Zhou.Y-T. Electrochimica Acta.
Enhancing cyclability and rate performance of Li2MoO4 by carbon coating.Wang.H-Y.Materials Letters.
Sodium insertion cathode material Na0.67[Ni0.4Co0.2Mn0.4]O2 with excellent electrochemical properties.Sun.X. Electrochimica Acta.
A new gridding cyanoferrate anode material for lithium and sodium ion batteries: Ti0.75Fe0.25[Fe(CN)6]0.96·1.9H2O with excellent electrochemical properties.Sun.X. Journal of Power Sources.
Mixed-carbon-coated LiMn0.4Fe0.6PO4 nanopowders with excellent high rate and low temperature performances for lithium-ion batteries. Zou.B-K.Electrochimica Acta.
Synthesis and characterization of perovskite-type (Li,Sr)(Zr,Nb)O3quaternary solid electrolyte for all-solid-state batteries.Yu.R. Journal of Power Sources.
In situ catalytic formation of graphene decoration on Na3V2(PO4)3 particles for ultrafast and long-life sodium storage.Hu.Q. Journal of Materials Chemistry A.
Controlling uniform deposition of discharge products at the nanoscale for rechargeable Na-O2 batteries.Zhang. S. Journal of Materials Chemistry A.
Solvothermal synthesized LiMn1-xFexPO4@C nanopowders with excellent high rate and low temperature performances for lithium-ion batteries.Zou.B-K. RSC Advances.
A high energy density full lithium-ion cell based on specially matched coulombic efficiency.Zou.B-K. Journal of Materials Chemistry A.
A gel-ceramic multi-layer electrolyte for long-life lithium sulfur batteries.Wang.Q. Chemical Communications.
Facile synthesis of mno/carbon/carbon nanotube nanohybrids using dental resins as solvent and carbon source. Ban.J.Digest Journal of Nanomaterials and Biostructures.
Improving the electrochemical properties of high-energy cathode material LiNi0.5Co0.2Mn0.3O2 by Zr doping and sintering in oxygen.Du.Q-X. Solid State Ionics.
Study of the fire behavior of high-energy lithium-ion batteries with full-scale burning test.Ping.P.Journal of Power Sources.
Molybdenum-doped lithium-rich layered-structured cathode material Li1.2Ni0.2Mn0.6O2 with high specific capacity and improved rate performance.Zang.Y. Electrochimica Acta.
Hydrothermally enhanced MnO/reduced graphite oxide composite anode materials for high performance lithium-ion batteries.Zou. B-K.Electrochimica Acta.
Open mesoporous spherical shell structured Co3O4 with highly efficient catalytic performance in Li-O2 batteries. Wang. F.Journal of Materials Chemistry A.
Synthesis of different CuO nanostructures by a new catalytic template method as anode materials for lithium-ion batteries.Ma.X-H. RSC Advances.
Cheng, B., et al., Nano-Li3V2(PO4)3 enwrapped into reduced graphene oxide sheets for lithium-ion batteries. Journal of Power Sources, 2014. 265: p. 104-109.
Ma, G., et al., Enhancement of long stability of Li-S battery by thin wall hollow spherical structured polypyrrole based sulfur cathode. RSC Advances, 2014. 4(41): p. 21612-21618.
Ma, G., et al., Hollow polyaniline sphere@sulfur composites for prolonged cycling stability of lithium-sulfur batteries. Journal of Materials Chemistry A, 2014. 2(27): p. 10350-10354.
Ma, X.-H., et al., Synthesis of three-dimensionally porous MnO thin films for lithium-ion batteries by improved Electrostatic Spray Deposition technique. Electrochimica Acta, 2014. 121: p. 15-20.
Ping, P., et al., Thermal behaviour analysis of lithium-ion battery at elevated temperature using deconvolution method. Applied Energy, 2014. 129: p. 261-273.
Ping, P., et al., Dimethyl sulfite as an additive for lithium bis(oxalate)borate/γ-Butyrolacton electrolyte to improve the performance of Li-ion battery. Journal of Electroanalytical Chemistry, 2014. 731: p. 119-127.
Qiao, Y., et al., Synthesis and electrochemical properties of porous double-shelled Mn2O3 hollow microspheres as a superior anode material for lithium ion batteries. Electrochimica Acta, 2014. 132: p. 323-331.
Sun, X., et al., Na[Ni0.4Fe0.2Mn0.4-xTix]O2: a cathode of high capacity and superior cyclability for Na-ion batteries. Journal of Materials Chemistry A, 2014. 2(41): p. 17268-17271.
Wen, J.-W., et al., Cathodes with intrinsic redox overcharge protection: A new strategy towards safer Li-ion batteries. Journal of Power Sources, 2014. 264: p. 155-160.
Wen, J.-W., et al., Li and Na storage behavior of bowl-like hollow Co3O4 microspheres as an anode material for lithium-ion and sodium-ion batteries. Electrochimica Acta, 2014. 132: p. 193-199.
Wen, J.-W., et al., One-step synthesis and effect of heat-treatment on the structure and electrochemical properties of LiNi0.5Mn1.5O4 cathode material for lithium-ion batteries. Electrochimica Acta, 2014. 133: p. 515-521.
Wu, W.W., et al., Ordered LiNi0.5Mn1.5O4 hollow microspheres as high-rate 5 V cathode materials for lithium ion batteries. Electrochimica Acta, 2014. 119: p. 206-213.
Zou, B.-K., et al., High rate LiMn2O4/carbon nanotube composite prepared by a two-step hydrothermal process. Journal of Power Sources, 2014. 268: p. 491-497.
Feng, Xuyong, et al. "A chromium oxide solution modified lithium titanium oxide with much improved rate performance." Journal of Materials Chemistry A 1.48 (2013): 15310-15315.
Sun, Yi, et al. "A composite film of reduced graphene oxide modified vanadium oxide nanoribbons as a free standing cathode material for rechargeable lithium batteries." Journal of Power Sources 241 (2013): 168-172.
Li, Xiao-Yan, et al. "A new lithium salt with tetrafluoro-1, 2-benzenediolato and oxalato complexes of boron for lithium battery electrolytes." Journal of Power Sources 235 (2013): 274-279.
Ma, Xiao-hang, et al. "Facile synthesis of flower-like and yarn-like alpha-Fe2O3 spherical cluster as anode materials for lithium-ion batteries." Electrochimica Acta 93 (2013):131-136
Teng, Fei, et al. "Hydrothermal synthesis of plate-like carbon-coated Li3V2 (PO4) 3 and its low temperature performance for high power lithium ion batteries." Electrochimica Acta 91.Complete (2013): 43-49.
Zhang, L. C., et al. "Rice paper-derived 3D-porous carbon films for lithium-ion batteries." Electrochimica Acta 89 (2013): 310-316.
Qiao, Yu, et al. "Synthesis and electrochemical properties of high performance yolk-structured LiMn2O4 microspheres for lithium ion batteries." Journal of Materials Chemistry A 1.3 (2013): 860-867.
Feng, X. Y., et al. "Synthesis and electrochemical properties of sticktight-like and nanosheet Co3O4 particles." Journal of Power Sources 230 (2013): 59-65.
Feng, Xu-Yong, et al. "Synthesis and reversible lithium storage of Cr2O5 as a new high energy density cathode material for rechargeable lithium batteries." Journal of Power Sources 222 (2013): 184-187.
Xing, Weiyi, et al. "Synthesis of a Sn–In mixed oxide/graphene hybrid as an electrode material with improved Li-storage properties." Materials Chemistry and Physics 140.2 (2013): 441-446.
Sun, Yi, et al. "Walnut-like vanadium oxide film with high rate performance as a cathode material for rechargeable lithium batteries." Journal of Power Sources 228 (2013): 7-13.
Wang, Lin, et al. "Watermelon used as a novel carbon source to improve the rate performance of iron oxide electrodes for lithium ion batteries." Electrochimica Acta 102 (2013): 306-311.
Li, Si-Rong, et al. "A facile route to synthesize nano-MnO/C composites and their application in lithium ion batteries." Chemical Engineering Journal 192 (2012): 226-231.
Xue, Zhao-Ming, et al. "A new lithium salt with tetrafluoro-1, 2-benzenediolato and lithium tetrafluoroborate for lithium battery electrolytes." Journal of Power Sources 202 (2012): 336-340.
Wen, Jianwu, Yan Yu, and Chunhua Chen. "A Review on Lithium-Ion Batteries Safety Issues: Existing Problems and Possible Solutions." Materials Express 2.3 (2012): 197-212.
Chen, Wufeng, et al. "Efficient preparation of highly hydrogenated graphene and its application as a high-performance anode material for lithium ion batteries." Nanoscale 4.6 (2012): 2124-2129.
Zhang, Linchao, et al. "Electrical properties of NASICON-type structured Li1.3Al0.3Ti17(PO4)3 solid electrolyte prepared by 1,2-propylene glycol-assisted sol-gel method." Chinese Journal of Chemical Physics 25 (2012) 703-707.
Zhong, G. B., et al. "Electrochemical investigations of the LiNi0.45M0.10Mn1.45O4(M= Fe, Co, Cr) 5V cathode materials for lithium ion batteries." Journal of Power Sources 205 (2012): 385-393.
Zhang, Dawei, et al. "Electrochemical performances of nano-Co3O4 with different morphologies as anode materials for Li-ion batteries." Ionics 18.6 (2012): 591-597.
Sun, Yi, et al. "Electrostatic spray deposition of nanoporous CoO/Co composite thin films as anode materials for lithium-ion batteries." Applied Surface Science 259 (2012): 769-773.
Li, Si-Rong, et al. "Electrostatic spray deposition of porous Fe2V4O13 films as electrodes for Li-ion batteries." Journal of Alloys and Compounds 520 (2012): 77-82.
Li, Si-Rong, et al. "Facile synthesis of micrometer Li1.05Mn1.95O4 and its low temperature performance for high power lithium ion batteries." Electrochimica Acta 81(2012) 191-196
Ding, Chu-xiong, et al. "Nanosized Spinel Li4Ti5O12 Anode Material Prepared by Gel-polymer Method using Furfuryl Alcohol as Polymerizable Solvent." Chinese Journal of Chemical Physics 25(2012) 457-462
Feng, XuYong, et al. "Nonstoichiometric Li1±xNi0. 5Mn1.5O4 with different structures and electrochemical properties." Chinese Science Bulletin 57.32 (2012): 4176-4180.
Zhang, L. C., et al. "Rice paper as a separator membrane in lithium-ion batteries." Journal of Power Sources 204 (2012): 149-154.
Zhong, G. B., et al. "Structural, electrochemical and thermal stability investigations on LiNi0.5−xAl2xMn1.5−xO4(0≤2x≤1.0) as 5 V cathode materials." Journal of Power Sources 216 (2012): 368-375.
Guo, Xiaohui, et al. "Surfactant-free scalable synthesis of hierarchically spherical Co3O4 superstructures and their enhanced lithium-ion storage performances." Nanotechnology 23.46 (2012): 465401.
Wang, Qingsong, et al. "Thermal runaway caused fire and explosion of lithium ion battery." Journal of power sources 208 (2012): 210-224.
Li, Si-Rong, et al. "Three-dimensional porous Fe0.1V2O5.15 thin film as a cathode material for lithium ion batteries." Electrochimica Acta 64 (2012): 81-86.
Tang, Ya-Nan, et al. "Two unsymmetrical lithium organoborates with mixed-ligand of croconato and oxalicdiolato or benzenediolato for lithium battery electrolytes." Journal of Power Sources 218 (2012): 134-139.